How Indirect Evaporative System Stands Out from Other Cooling System?

November 27, 2020
admin
Indirect-Evaporative-cooling-system

The demand for indirect evaporative cooling systems has grown quite significantly in the last few years. If you are thinking about getting the right cooling system for your workspace then you have certainly landed yourself on the right page. We are here to discuss different types of evaporative coolers and what can be the best match for your property.

What Are Evaporative Coolers?

When it comes to evaporative cooling systems, they are also acknowledged with the name of Desert coolers and are available in different types. So, you need to research well and understand which types of evaporative cooling systems will fit your space. From an indirect evaporative cooling system to direct Evaporative systems, you need to understand the process of their mechanism and then decide which system will help you with the best result.

The evaporative coolers are a perfect option for the places where the humidity is very low and the ambient temperature is high. All these aspects help the system to provide cool air for breathing and comfort working. Higher the temperature ,better the cooling efficiency.

Take a look at the Indirect Direct evaporative Cooling system . It involves tow stages of cooling -Indirect Evporative Cooling and Direct Evaporative Cooling:

FIRST STAGE : INDIRECT COOLING

As depicted below in the schematic diagram, the indirect stage cools the outdoor air without adding moisture. This cooling is typically achieved using one of two methods. In one method a cooling tower may be used to provide naturally cooled water to a cooling coil in the AHU. In another method a plate type heat exchanger may be used in first stage of cooling. The incoming ambient air is cooled using a cross-flow heat exchanger .

It lowers down both Dry bulb temperature and wet bulb temperature of incoming air without use of any compressors.

INDIRECT-COOLING

2ND stage – DIRECT COOLING

The same air stream passes through a water- saturated honey comb pad (evaporative media) where additional cooling takes place.However,This increases the humidity level of air. This evaporative media is designed to be 90 percent efficient.. Since in indirect mode the air stream has already been cooled without adding moisture.Therefore, the air after stage-2 has a lower humidity than it would have using only a direct evaporative process.

The psychrometric chart below shows the indirect direct evaporative cooling (IDEC) process:

indirect-direct-evaporative-cooling-system-evapoler

Why Indirect Evaporative Cooling System?

The demand for indirect evaporative cooling systems is getting higher with every passing day. The reason being the way it operates. It brings in a number of advantages with itself and helps one avail complete value for money.

Take a look at the advantages of indirect evaporative cooling systems:

  • With the help of this technology, the electricity will get down so will the expenses related to it.
  • It gives better cooling than direct evaporative cooling and that too with low humidity.
  • You will be benefited from completely fresh air. This means there will be no recirculated air to get your health down.
  • This technology is not using any kind of harmful refrigerants and is following the eco-friendly mechanism to help you breathe easy.

So, these are the benefits of Indirect evaporative cooling systems and this is what separates it from others. All you have to do is to look for a reliable indirect evaporative cooler manufacturer and supplier like Evapoler to help you have it installed. Connect now and get your indirect evaporative cooling system installed at very nominal rates and as per your business needs!

Say Hello To Energy Efficient Indirect Evaporative Coolers

September 26, 2020
admin

Indirect evaporative cooling systems are a step closer to air conditioning technology. Its working principle is based on a plate type heat exchanger and they do not use refrigerants as cooling media.

This is the reason they reduce carbon footprint, supply fresh and cool air and also save a considerable amount of energy consumption.

What Is Indirect Evaporative Cooling?

When it comes to Indirect Evaporative cooling, it is more sort of air conditioning. Yes, the way it works and delivers cooling is very much close to air conditioning. But, when it comes to refrigerant based air conditioning, it follows the mechanism of higher Capex and opex. This is not the way the indirect evaporative cooling system works.

When it comes to indirect evaporative cooling solutions, it will be able to deliver the required level of comfort and cooling especially during the time of the rainy season. The respective system is very much energy efficient and will ensure that you get the best service as well. It is also not causing any harm to the environment as well.

The two stage cooling solutions makes this product quite an invention because it paves the way for a refreshing cooling technology that helps you breathe fresh air.

What Are Its Features?

  • The IDE cooling systems will not be adding any kind of moisture in the stage1. This is the reason why it will work better during the time of the rainy season.
  • Another amazing part about IDEC Technology is that it helps you with 5 Degree Centigrade more Cooling and that too with around 60% less moisture when compared to direct evaporative cooling systems.
  • When it comes to Indirect evaporative cooling, it will be needing 30 to 40% less air when compared to DEC.
  • With the help of this system, you will surely get attributes of fresh air that eventually boost productivity as well.
  • Lastly, it will help save energy as well. It requires 40 to 60 percent lower energy consumption when compared to conventional air conditioning systems

So, these are the attributes that show how amazing Indirect evaporative cooling systems are and how it can help you save money and time. Evapoler is here to help you with these systems. Get connected now!

INDUSTRIAL AIR COOLING

June 18, 2020
admin

Convenient And Fulfilling: Industrial Air Coolers

Are you looking for industrial air coolers with enhanced air quality? Well, it is important that you research well and then choose the right product. There are many not selling the right product and claiming to be the best the business. The demand is high but, you need to make sure that you are getting the right product for yourself.

Ideal Industrial Air Cooler

  • When it comes to industrial cooler, you will get it infused with inbuilt single phasing and also overload security.
  • Not only this, these industrial coolers are also installed with the best electrical safety attributes which will be matching the industrial standards.
  • You will have most of the different types of industrial air coolers available at very nominal pricing and will be able to help you with best-in-class performance when it comes to cooling.

So, this is the basic picture of what an industrial cooler is and you need to research accordingly keeping all the attributes in mind. Getting the right air cooler will help you avail maximum benefits. Most importantly, your indoor air quality will get better quite significantly. So, if it enhances the quality of breathing air, it will allow the workers to deliver better productivity, an excellent atmosphere, and a low rate of absenteeism.

This shows how the quality of your industrial air cooler can literally change the dynamics of your business completely. All you need to do is to find the right company where you get these industrial ductable air coolers which can be optimized according to your spacing needs and help you with excellent cooling.

How It Works

When it comes to evaporative air coolers, it will actually follow the natural process to get your industrial space chilled the way you wanted. You can always choose the way you want it to operate by changing the variable related to its speed and other sensors. But, you can be assured that with the industrial air coolers, you will be benefitted from 100% fresh air which will certainly enhance your lifestyle.

There is no reason why one should not take this for its commercial space. Available at an excellent price and will also play a role in enhance work productivity, what else you need?

Basic Features You Get With Industrial Air Cooler

  • When it comes to industrial air, it operates on the evaporation of the water principles. It has cooling pads as well which will help you avail top cooling performance.
  • You can use it with ease and it also comes with a robust castor wheel with which you can move it from one place to another with ease.
  • You can also avail air coolers with high static pressure which ideal for central air cooling.
  • The attributes like Variable speed allow it to adjust the levels of cooling according to the needs.

So, these are the basic features that will be coming towards you with top industrial coolers. All you need is to find the right company and they will help you with the best as per your customized needs.

At Your Service: Indirect Evaporative Technology

May 6, 2020
admin
industrial-cooling-system-fresh-air

Are you looking for an evaporative air cooler which can help you with 100 percent fresh air? Well, you have certainly landed yourself on the right page. We are here to discuss about the technology which has made it possible for you to relish completely fresh and cool right at your own space.

Thinking how?

We are talking about indirect evaporative coolers! Yes, they are highly appreciated when it comes to helping one with air which has no pollutant for you to worry about. If you are thinking about how it is possible then, it is possible because of the hyper-efficient heat exchanger technology. It allows the respective machine to assist you with pollution-free air with better temperature drops compared to direct evaporative air cooling.

The fresh air delivered by the evaporative air cooler is healthy and no part of it is recycled. It thus ensures better indoor air quality. The temperatures match with the dew point which helps you with the best benefit of being energy efficient. You save up to 80 percent energy while using it for your needs.

Evaporative Air Cooler: Your Heat Sheild

With heat and temperature soaring outside, Evaporative coolers will never let you down! They will always help you avail fresh and cool air using the same amount of power. But, if you compare it with refrigerator systems, these air coolers are way more energy-efficient and yet help you get yourself protected from high temperatures.

So, there is no second thought when it comes to purchasing these machines. Not only it helps you with excellent service but also with cost-effective capabilities. In fact, as the temperature gets higher, they automatically change their performance so that you remain comfortable all the time.

Benefits of Indirect Evaporative Cooler

  • indirect-direct evaporative cooling (IDEC) also popularly known as “2-stage evaporative cooling”, uses 60% – 75% less electricity than conventional refrigerant-based mechanical AC systems.
  • Due to their design, these systems are best suited for arid or semi-arid climates and can save lot of energy compared to Air Conditioning.
  • As stated above, cooling capabilities get better as and when the air temperature is soaring outside.
  • With this device, you will never have to worry about the pricing. It helps to be completely cost-effective.
  • The air they will be giving will have no moisture added to it. So, it will help you with the benefit of dry air cooling.
  • You can be assured that with the help of evaporative coolers you will be benefited with100% fresh air and better cooling upto 5 degree celsius less than Direct Evaporatvie Air Cooler..
  • This machine comes up with a wide product spectrum so that it can match application needs.
  • Schools, data centers, offices, clinics, warehouse/distribution centers and others can make great candidates for capturing the benefits of indirect Evaporative cooling.
  • It also comes with flexible engineering and design configurations which exclusively makes it convenient to customise to customer’s individual needs.

So, these are the benefits of evaporative air coolers and how it is exclusively making a significant impact on one’s life with a breath of fresh air. If you are thinking about getting one for your needs, connecting with Evapoler can help! We will always help you with the best of product range which can assist you to beat the heat with ease and keep you cool.

Best Industrial Air Cooler

May 1, 2020
admin
Best Industrial air cooler black color

Industrial air cooler are the need of hour to provide natural, 100% fresh & healthy cool air to effectively cool industrial work floor. Industrial air coolers are also referred to as industrial evaporative cooler or industrial ductable coolers. Industrial Coolers are used to cool large open spaces like factories, ware houses , sports complexes economically and with lesser running cost. As Such these industrial air cooling systems are also used as a cost-effective industrial cooling solution hot and dry climates like Jaipur, Indore , Gurgaon, Manesar in India.

1. Where we can use Industrial Cooler?

Industrial coolers function on evaporating of water by hot air principle. The incoming hot air vaporise the water falling on the pads. The vaporisation of water takes away latent heat of air and in the process cools the air and increases its moisture level called relative humidity. They are more eco-friendly and efficient in energy consumption than traditional air conditioners. Generally, they are also more powerful than normal exhaust fans. Mainly, they are used to cool Factories, workshops, sports arenas, warehouses, manufacturing plants, commercial offices, and hangars. Others are gyms, loading docks, large tents, garages, marriage halls, Religious congregation, etc.

VmrhG1

2. Types of Industrial Air Cooler

a) Portable Evaporative Coolers
Also known as industrial Portable Air Cooler, are a type of industrial evaporative air coolers. these are mostly used in industrial places, commercial areas like warehouses and garages, Govt offices, hostels, Banquet halls, etc.. They can also be used other outdoor areas like patios. The capacities ar upto 18000 CMH to cover an area of up to 2500 SFT with single Cooler.

b) Ductable Evaporative Air Coolers
These are built mostly for huge commercial or industrial complexes to cool the space uniformly. The air is distributed through rectangular or spiral-shaped ducts, The air is discharged to the required space through nozzle diffusers or Linear or DL supply Air Grills.  Industrial air coolers include Roof Installed or wall-mounted air cooler, side discharge cooler, and down discharge cooler. Typically, the Airflow capacity is up to 30,000 CMH per unit.

Three Ways to install Ductable coolers :

cPPMoY
3x5xug
Air cooler

The range of an intsalled cooler is determined by air direction, i.e. how the cooling machine discharge the air :

(i) Top Discharge Air Cooler: are capable of cooling a whole room/house or an entire workshop.

(ii) Down Discharge Air Cooler: These are located on the roof and release cooled air downwards. The cool air discharged directly into the targeted building and can be used to cool entire homes.

(iii)Side Discharge Air Coolers: are normally placed on the side of a building, but also on the roof. They use an straight or U -bend to discharge the cool air in targeted space based on its placement on wall or roof.

3. Is an Ductable Industrial evaporative

cooler better than Air Conditioning unit?
When operating a huge industrial plant, traditional air cooling methods can be expensive or ineffective at fighting extremely high temperatures. However, industrial air coolers come with large water tanks or float valve connection to ensure continuous water supply if connected with overhead Tanks.

Industrial air coolers work in Best in open areas

Other than being cost-effective, industrial coolers produce 100% fresh air. They also don’t recirculate the same air like the air conditioner. This fresh air helps to increase productivity, promote the feeling of well-being and sustains higher and better concentration levels. An air conditioning unit is highly recommended for domestic use, small industrial rooms, and offices.

Affordable running costs for an Industrial Air Cooler

Although the installation of an evaporative cooler is same or little expensive than ACt, but it is a feasible cooling solution for the most industrial buildings. The running cost is less by 70-80% compared to Air conditioning. As such , recurring expenses are little compared to an air conditioning system of equivalent capacity.

4. How to Calculate the Size of Industrial air Coolers?

An industrial air cooler’s cooling power is based on how much airflow it can generate. It is for this reason that these coolers are categorized by airflow. They are typically rated in cube meters per hour (CMH), or cubic feet per minute (CFM). This calibration measures the total amount of air an air cooler can discharge or move per unit time.

CMH= Area of space im m2 x Meight in M x Air Changes per Hour

For example:
If need to cool an area of 10 mtr x 10 and ceiling height is 10 Mtr

Air changes per hour = 20 times

Total amount of air replaced or required to cool per hour = 100×10 m3 x 20 times = 10,000 cubic mtr.

You will buy a cooler unit with a 10,000 CMH rating.

P.S.: Air Exchange Times Required Under Different Circumstances

5. Important points to Consider When Buying a Best Industrial Air Coolers

ndustrial plants require various kinds of maintenance Equipments . These are required to keep the operation and performance of their machines and equipment smooth. One of them is a proper and efficient industrial air cooler. It’s used to make sure an industry’s overall environment remains safe and well-maintained at all times. Air cooler  come with a variety of features but here are some of the important ones that can be of great benefit to you.

So, what factors should one evaluate when planning to purchase for the best industrial cooling system?

Case material & thickness
Fresh material or recycled material? If used fresh material, it could be used for 10 years, while if use recycled material might have some problem after 1-2 years. The case material used should be fresh and not from recycled materials in order to guarantee long life. It should also be of the right thickness. Generally the thicker, the better.

Cooling pad
For an industrial cooler to function effectively, it needs to have the right cooling pad based on size and thickness. The thicker and bigger the cooling pad, the better the cooling performance.

Fan for Motor wiring
100% copper wiring is best suited for a cooler in order to be effective and work well. Some manufacturers use aluminum wound motor to be cost-effective but will end up compromising the quality of the product.

Checking  airflow volume
Thoroughly check the airflow volume because some suppliers indicate a higher value than what is in the specification sheet. This may be misguiding and you will end up with an industrial cooler that doesn’t meet your specifications.

To ensure you are not dubbed into buying a cooler that is short of your specifications, calculate yourself the air flow volume. By doing these you will be certain you have the right product.

Here is a formula to calculate: Airflow volume (m3/h) =Average speed (m/s) x Air Outlet area(m2)

6. Tips for installing an industrial evaporative cooler

– Mounting the cooler
An Industrial Air Cooler needs to be installed outside your home or premise. You can fix it in different locations, depending on the type of cooler one have chosen and the space available to keep it…

Roof-mounted: These are the most common air coolers, although they are more difficult to maintain.

Wall / Window Mounted: It is easy to carry out maintenance on a wall/ window-mounted unit. They also reduce the chance of house leaks. However, it is important to note that wall/ window mounted coolers blow chilled air in the house into a central area. They are highly recommended for small homes or bigger apartments with specially installed ductwork.

evapoler-1

Installation height
Industrial air coolers should be installed at least 10 feet away or 3 feet below plumbing combustion appliance vents, plumbing vents, exhaust fan vents or clothes dryer vents. Make sure to keep fuel, yard chemicals, and solvents away from the cooler.

Check Float
Always check the float valve after every pump cycle. This way, you will ensure that the float is not set too high, causing the reservoir of water to overflow.

Maintenance distance
Provide at least 3ft of clearance on the side of the equipment that requires access for maintenance. This is a code requirement for all sides with electrical parts.

Use closed-eye Hooks
To hang your coolers safely and securely, use closed-eye hooks. However, take care not to lift the open-eye hook from the chain and leave your equipment unsupported when removing the frame.

The water line
An industrial air cooler needs a steady supply of clean water. Make sure to connect the water line to the system from an outdoor water source with cut-off valves. A cut-off valve is highly useful when you need to drain your system at the start of the winter season to minimize damage from harsh weather.

Power up
Before powering up your cooling system, confirm that there are no leaks. Also, fill any void spaces around the cooler to prevent cooled air from escaping the system. Once you have confirmed all these parts are set, you can switch it on. If you are unfamiliar with the electrical connections, it is highly recommended that you seek the services of a certified electrician.

7. How to maintain Industrial cooler

If you are looking for a cooling system for commercial buildings or industries, opting for industrial evaporative coolers would be a great option. Listed below are some tips that can help maintain industrial air coolers.

Regular Change of Cooler Pads
Change Cooler pads regularly. Pads are pressed against the cooler. Leaving old pads that have dirt and minerals accumulated on them can cause the cooler to deteriorate, To avoid rusting it always good to change pads before start of summer season. Most people who fail the change the pads to save money ultimately have to spend more in the long run as they may have to change the entire cooler instead of just the pads.

– How often should you replace the industrial evaporative air cooler pads? 

1) Reduced air flow
If your commercial air cooler is not cooling as much as it did in the past, a possible reason for this problem could be due to the particles that get caught in the pads. To solve the problem, an economical solution would be to replace the pads. However, it does not solve the problem; it is recommended to move on to more troubleshooting.

2) Types of materials
The type of materials used in the pads is one of the factors that decide whether a pad need to be replaced yearly or can last for years. While cellulose pads need to be replaced less often, pads made of cheap materials such as aspen may be required to be replaced each season.

3) Yearly Maintenance 
Generally, pads may not be required to be changed every year. However, if the pad has lost its thickness or if the material has become frayed, it is best to get a new pad.

Protection for Your Cooler

Keep Your Cooler protected Investing in a cooler cover will help prevent outdoor air from entering your home or building. Sometimes coolers have dampers. However, if your cooler does not have one, installing a cooler cover will help increase the life of

air washer system

Covid 19- Air washer the best Equipment for Central cooling with 100 % fresh and cool air

April 25, 2020
admin
Air washer in covid 19

What is industrial Air Washer system

A Industrial air washer  system is a hybrid appliance, a combination of an air purifier ,a humidifier and 100% fresh air supplying Air cooler. Like conventional humidifiers, industrial air washers add therapeutic moisture to the air. And, like a conventional air purifier, an air washer removes symptom-triggering allergens from the air. It also cools the air like an Evaporative air cooler.Therefore, they are capable of soothing your uncomfortable dry air symptoms and easing your allergies. The pre-dust filters prevents dust particles from entering in the the area to be cooled.

How Air Washers Work

industrial Air washer system  are Metallic Air handling Unit made of metal cabinet and having centrifugal fan to generate high pressure air. A water circulating pump sprinkles water on Cellulose pads to cool the incoming hot air.

Air washers remove many types of household allergens—including dust, dust mites, pet dander, pet hair, mold spores, pollen, and other airborne particles—while adding moisture to the air. The most popular types of air washers use impeller technology. Industrial air washer system  also use pre-filter to filter out allergens and dust particles from inbound air prior to cool your room. These models use evaporative principle technology to add moisture to your space.

Air Flow capacities of air washer system

Air washer system come in the capacities starting from 5000 CFM of air flow to 100000 CFM .The area coverage capacity for cooling purpose with single equipment is from 1000 SQFT to 5000 SQFT .The air distribution effected via Galvanised Duct .The final air distribution made through Air Grills . Consider choosing a slightly larger capacity air washer than you think you’ll need in order to ensure optimal cooling ,humidifying and air washing.

Features

Advanced features help make an industrial air washer system easier to use and maintain. When
shopping, compare the feature line-up for each model and decide if there are any
must-have features on your list. Popular air washer features include:

  • Multiple fan speeds
  • VFD compatible motor
  • Single phasing , short circuit Protection.
  • Digital Remote controls
  • Adjustable humidistat
  • Low-water indicator with automatic shutoff
  • Filter change indicator

Maintenance

As with humidifiers and air coolers, it’s extremely important to clean your air washer regularly. Frequent cleanings prevent mold, mildew, and bacteria growth inside the water reservoir and rid the unit of the allergens and other particles it has filtered out overtime. We recommend that you clean your air washer every few days to maintain optimal operation . It is also a good idea to change the water on regular basis to keep the moisture fresh. To clean your air washer, follow the instructions included in the owner’s manual.

Customised Pre Air Filters

It’s important to keep in mind that while an air washer helps clean and cool the air, it doesn’t provide the same level of filtration for allergens that a dedicated air purifier would. HEPA (High Efficiency Particulate Air) air purifiers are capable of removing 99.97% of allergens as small as 0.3 microns. In comparison, an Blower -type air washer can remove allergens as small as 1.5 microns. If some one have severe allergies or simply want a higher level of air cleaning, we recommend using a HEPA air purifier in addition to an air washer or ask for customisation of Air washer with Hepa Air Filter of 0.3 microns .

Air Coolers Manufacturer in India

April 10, 2020
admin
best air cooler in india

Air Coolers Manufacturers, Air Coolers suppliers, Air Cooler’s producers in India. Evapoler Coolers Introduce 100% Fresh Air. Call now! Cost Effective, Energy Efficient Cooling.

When it comes to surviving the scorching heat of the Indian summer, air coolers have become an essential part of our lives. And at the forefront of providing reliable and innovative cooling solutions is Evapolar, a leading air cooler manufacturer in India.

Why Choose Evapoler Coolers?

Evapolar has earned an excellent reputation in the market for its commitment to quality, energy efficiency, and customer satisfaction. As one of the top air cooler manufacturers in India, we understand the country’s unique cooling needs and have tailored our products to suit varied climatic conditions

Cost-Effective and Energy-Efficient Cooling Solutions

One of the major benefits of choosing an evaporative cooler is the focus on energy efficiency. Our air coolers are designed to consume less power while delivering optimum cooling performance, making them a cost-effective and eco-friendly option for both residential and commercial spaces. With Evapolar, you can enjoy a cool and refreshing environment without worrying about skyrocketing energy bills.

Introducing 100% Fresh Air Technology

Unlike traditional air conditioning systems that recycle the same air, Evapoler Coolers introduce 100% fresh air into your living or working spaces. This not only provides a healthier environment but also helps in reducing the risk of airborne diseases and allergies. The innovative technology used by Evapoler ensures that you experience the benefits of fresh and natural air throughout the day.

Customizable Air Cooling Solutions

We understand that each customer has different cooling needs. That’s why we offer a range of customizable air cooler solutions to meet different needs. Whether you need a compact cooler for your bedroom or a powerful unit for a large commercial space, Evapolar Coolers has you covered.

Reliable and High-Quality Products

Evapolar takes pride in manufacturing air coolers that are built to last. Each unit undergoes rigorous quality checks to ensure that it meets the highest standards of performance and durability. By choosing air coolers from Evapolar, you invest in a cooling solution that will serve you faithfully for years to come.

Experience Fresh Air Cooling Today!

Experience the refreshing and cost-effective cooling solutions offered by Evapoler, the premier air cooler manufacturer in India. Whether it’s for your home, office, or industrial space, their range of energy-efficient air coolers is sure to keep you comfortable and cool throughout the hot months.

Contact Evapoler Coolers Now!

Take the first step towards a cooler and more comfortable environment. Contact us today and discover the perfect air-cooling solution for your needs. Our expert team is ready to assist you in making the right choice for your cooling requirements. Embrace the goodness of 100% fresh air and experience the difference with Evapoler Coolers. Call now and let the cooling begin!