Evapoler 180 H Down

Factory Cooler comes with corded Controller with touch screen Functions & Remote controlled.
Factory Cooler High-efficiency Honey Comb Cooling Pads with higher saturation levels.
10 adjustable fan speed.
Factory Cooler has a Non-clogging type water distributor for uniform water distribution over pads.
100% copper wounded electric motor for durability and Aluminium casing to ensure fast heat dissipation.
Unique design of blades offers maximum air flow & minimum noise. factory Coolers are Made of electroplated, rust-free metal and heavy-duty industrial polypropylene.
Submersible type water pump for continuous water supply.
Factory coolers have Pre-dust filters to ensure dust free air and to prolongs the life of pads.
Water Level sensor to protect the pump in case of low water levels.
Auto clean drain valve to ensure water draining at set regular intervals to prevent scale formation and algae growth.
Float valve to ensure continuous water supply and maintain set water level.
UV-Stabilised weather resistant and high strength polymer casing for longer life.

Description

Description

As a cooling system for a factory, evaporative coolers can drop the air temperature by up to 20 degrees. For cooling a factory floor, Ductable air cooling systems are energy efficient and environmentally friendly.

In Dry climate and low humidity (below 60%) zones ,evaporative coolers have the added advantage of putting moisture into the air as well as cooling the factories.

Portable Cooling models can be effective for spot cooling in areas of the factory that get especially hot .These may be molten metal pouring areas,injection moulding areas or places radiating heat from furnances.

While a more technical approach to cooling a factory may be necessary — and it will depend on the setup of the building — it might begin by opening doors and windows to improve air circulation. Opening windows higher on the walls or near the ceiling will allow hot air to escape and can help lower the factory temperature.

Specifications

Specs/Model	Single Phase	3-Phase
Airflow (m³/h)	18000	18000
Pressure (pa)	190	194
Output (Kw)	1.1	1.1
V/Hz	220/50	380/50
Rated Currency (A)	5.6	2.0
Fan Type	Axial	Axial
Fan Speeds	Single-phase various speed	3-phase,2-speed
Noise (dBA)	≤76	≤76
Dimension L×W×H (mm)	11501150950	11501150950
Vent size (LxW) mm	650*650	650*650
Net Weight (kg)	80	80
Operating Weight (kg)	110	110
Auto Cleaning	Yes	Yes
Low Water Protection	Yes	Yes
Water Capacity （L)	30	30